Ľutujeme, spoločnosť ponúkajúca danú pracovnú pozíciu ukončila zverejnenie ponuky na stránke.
Ďakujeme za porozumenie.
Zobraziť podobné ponuky
Ďakujeme za porozumenie.
Zobraziť podobné ponuky
Design Leader
Segula Slovensko s.r.o.
Place of work
Hlohovec
Hlohovec
Contract type
full-time, trade licence
full-time, trade licence
Start date
by agreement
by agreement
Wage (gross)
2 400 - 3 000 EUR/monthby agreement, depending on the experience and skills of the candidate
2 400 - 3 000 EUR/monthby agreement, depending on the experience and skills of the candidate
Information about the position
Job description, responsibilities and duties
Design Leader position for Industrialization phase (tuning/mock-up activities)
Ensure product design and architecture to meet the customer quality requirements (including weight, recycling... specifications), manufacturing requirements (design for manufacturing) as well as all costs and timing expectations
Manage functionally the CAD resources to fulfill the design
Ensures Design Standard are implemented
KPI and/or main deliverables:
CTQ (Critical to Quality) convergence
Isostatism file + stack up analysis folder
Style surfaces analysis
Design review actions plan
Product 3D + 2D data
MAIN ACTIVITIES:
Work according to HSE requirements
Get from customer all technical elements necessary for the design (gap and flushness requirements, surrounding parts, interfaces…)
Look for solutions and suggests technical proposals for project decision, respecting existing documents in network (design standards, lessons learnt, benchmark reports…)
Realize and pilots the design of parts and products: analyzes the feasibility (styling surface, parting lines, aspect, injection, demoulding, painting, assembly, packaging, perceived quality, recycling …) with regards to functional specifications from customer. According to the complexity of the parts, the phase of the project and its competencies, he will have to define the parts with CAD software used in-house or pilot CAD engineers in order to make the full 3D data of the parts
Manage the daily technical flow of information with CAD office and the Tier 2 suppliers according to the standard
Check and validates the quality of the CAD files received from suppliers and design offices
Ensures the regular update of the 3D data, 2D drawing and parts’ attributes within the CAD file database
Check and suggests the datum schemes of the parts, semi-finished products and products and updates it during the project
Build the geometry file with stack-ups and tolerances, ensures the validation by the Geometry Engineer.
Updates this folder during the project life
Liaise with the toolmaker together with the Injection & Tooling Engineer to optimize the design of the tools at the same time as the design of the parts
Before the tool kick-off, defines and formalizes with EPM and the Injection & Tool Engineer the un-frozen areas to be taken into account for the tools realization
For manufacturing of the checking fixtures, suggests to the EPM and the Geometry Engineer the functional specification to take into account (list of nominal parts, list of sub-assembly and assembly to measure…)
Follow the realization of 2D drawings of the internal parts and assembly regarding to the project requirements.
Validates technically these drawings before submission to the project for validation before provided to customer
For parts designed by the Tier 2 suppliers:
Provides to the supplier all 3D data needed, gap & flushness requirements and functional specifications
Analyses the planning of the design of the supplier and checks that it is compatible with his own activities
Participates to the validation of the datum scheme, the tolerance stack-ups and measuring points
Checks and validates the 3D design and give feed-back to the supplier and to the EPM
Validates the 2D drawings of the supplier
For POE parts designed by POAE:
Provide the 3D data, functional specifications and gap & flushness to the supplier to validate process feasibility
Update the 3D data if needed
Provide the 2D drawings to the supplier
Propose and leads the Design Reviews on his project
Execute the actions decided during the design reviews and updates regularly the action plan
Take into account the perimeter changes after written validation from the EPM
Manage the CAD file exchanges with the customer respecting internal standards and customer specifications
During the tuning phase:
Validate the 2D drawings of the supplier
Can participate to tool trials
Can manage the manufacturing of samples for the customer and the process validation o Can participate to the cubing events at the customer
Analyze and suggests modifications on the parts and products to meet the requirements (by taking also into account the feedback from other team members)
Update or pilot the updates of the CAD data according to modifications validated by the project
Report to the EPM the status of the Design Reviews and related actions, the CAD data timing plan and action plan
Capitalize and formalizes the lessons learned of the design during all the project life
Ensure product design and architecture to meet the customer quality requirements (including weight, recycling... specifications), manufacturing requirements (design for manufacturing) as well as all costs and timing expectations
Manage functionally the CAD resources to fulfill the design
Ensures Design Standard are implemented
KPI and/or main deliverables:
CTQ (Critical to Quality) convergence
Isostatism file + stack up analysis folder
Style surfaces analysis
Design review actions plan
Product 3D + 2D data
MAIN ACTIVITIES:
Work according to HSE requirements
Get from customer all technical elements necessary for the design (gap and flushness requirements, surrounding parts, interfaces…)
Look for solutions and suggests technical proposals for project decision, respecting existing documents in network (design standards, lessons learnt, benchmark reports…)
Realize and pilots the design of parts and products: analyzes the feasibility (styling surface, parting lines, aspect, injection, demoulding, painting, assembly, packaging, perceived quality, recycling …) with regards to functional specifications from customer. According to the complexity of the parts, the phase of the project and its competencies, he will have to define the parts with CAD software used in-house or pilot CAD engineers in order to make the full 3D data of the parts
Manage the daily technical flow of information with CAD office and the Tier 2 suppliers according to the standard
Check and validates the quality of the CAD files received from suppliers and design offices
Ensures the regular update of the 3D data, 2D drawing and parts’ attributes within the CAD file database
Check and suggests the datum schemes of the parts, semi-finished products and products and updates it during the project
Build the geometry file with stack-ups and tolerances, ensures the validation by the Geometry Engineer.
Updates this folder during the project life
Liaise with the toolmaker together with the Injection & Tooling Engineer to optimize the design of the tools at the same time as the design of the parts
Before the tool kick-off, defines and formalizes with EPM and the Injection & Tool Engineer the un-frozen areas to be taken into account for the tools realization
For manufacturing of the checking fixtures, suggests to the EPM and the Geometry Engineer the functional specification to take into account (list of nominal parts, list of sub-assembly and assembly to measure…)
Follow the realization of 2D drawings of the internal parts and assembly regarding to the project requirements.
Validates technically these drawings before submission to the project for validation before provided to customer
For parts designed by the Tier 2 suppliers:
Provides to the supplier all 3D data needed, gap & flushness requirements and functional specifications
Analyses the planning of the design of the supplier and checks that it is compatible with his own activities
Participates to the validation of the datum scheme, the tolerance stack-ups and measuring points
Checks and validates the 3D design and give feed-back to the supplier and to the EPM
Validates the 2D drawings of the supplier
For POE parts designed by POAE:
Provide the 3D data, functional specifications and gap & flushness to the supplier to validate process feasibility
Update the 3D data if needed
Provide the 2D drawings to the supplier
Propose and leads the Design Reviews on his project
Execute the actions decided during the design reviews and updates regularly the action plan
Take into account the perimeter changes after written validation from the EPM
Manage the CAD file exchanges with the customer respecting internal standards and customer specifications
During the tuning phase:
Validate the 2D drawings of the supplier
Can participate to tool trials
Can manage the manufacturing of samples for the customer and the process validation o Can participate to the cubing events at the customer
Analyze and suggests modifications on the parts and products to meet the requirements (by taking also into account the feedback from other team members)
Update or pilot the updates of the CAD data according to modifications validated by the project
Report to the EPM the status of the Design Reviews and related actions, the CAD data timing plan and action plan
Capitalize and formalizes the lessons learned of the design during all the project life
Employee perks, benefits
Long-term employment and stimulative pay
Working in a highly motivated and young development team
Working with the most modern technologies
Opportunities for professional and personal growth
Working in a highly motivated and young development team
Working with the most modern technologies
Opportunities for professional and personal growth
Requirements for the employee
Candidates with education suit the position
Secondary with school-leaving examination
Follow-up/Higher Professional Education
University education (Bachelor's degree)
University education (Master's degree)
Follow-up/Higher Professional Education
University education (Bachelor's degree)
University education (Master's degree)
Language skills
English - Upper intermediate (B2)
Other knowledge
CAD - Advanced
Driving licence
B
Experience in the position/sector
CAD Engineer, Mould engineer, Plastic Parts design
Number of years of experience
3
Personality requirements and skills
Bachelor Degree or equivalent professional experiences
Basic plastic rules, basic mechanicals rules, able to define isostatism system and to build stack up folder, able to build and check product under CAD software system; able to lead cad 3D and 2D activities;
Good command of English
CAD Engineer, Mould engineer, Plastic Parts design
Basic plastic rules, basic mechanicals rules, able to define isostatism system and to build stack up folder, able to build and check product under CAD software system; able to lead cad 3D and 2D activities;
Good command of English
CAD Engineer, Mould engineer, Plastic Parts design
Advertiser
Brief description of the company
SEGULA Technologies Slovakia s.r.o. is a part of the international engineering group SEGULA Technologies, which helps boost competitiveness within all major industrial sectors - automotive, aerospace & defense, energy, rail, naval, pharmaceutical, and Oil and Gas.
Expand your playgroung with a fast-growing global engineering group. At SEGULA Technologies, you will have the opportunity to work on exciting projects and shape the future within a company for which innovation is inseparable from engineering. New forms of mobility, autonomous vehicles, the factory of the future, augmented reality... these are the daily concerns of our 15,000 ingenious talents in over 30 countries.
Whether you are a student, a recent graduate or experienced, an engineer or a project manager, at SEGULA you will find the opportunity that will give new meaning to your career. Make your move, Join us.
Expand your playgroung with a fast-growing global engineering group. At SEGULA Technologies, you will have the opportunity to work on exciting projects and shape the future within a company for which innovation is inseparable from engineering. New forms of mobility, autonomous vehicles, the factory of the future, augmented reality... these are the daily concerns of our 15,000 ingenious talents in over 30 countries.
Whether you are a student, a recent graduate or experienced, an engineer or a project manager, at SEGULA you will find the opportunity that will give new meaning to your career. Make your move, Join us.
Number of employees
150-199 employees
Contact
ID: 4334018
Dátum zverejnenia: 20.3.2023
2023-03-20
lokalita: Hlohovec Pozícia: Design Engineer, Technologist Spoločnosť: Segula Slovensko s.r.o.
Základná zložka mzdy (brutto): 2 400 EUR/month