Sajnáljuk, de a hirdető cég már megszüntette az állásajánlat közzétételét a honlapunkon.
Megértését köszönjük.
Mutasd a hasonló álláshirdetéseket
Megértését köszönjük.
Mutasd a hasonló álláshirdetéseket
Dimensional Control Engineer (Quality, Measurement,Metrology) - Automotive
Talent Solutions - ADECCO
Place of work
Nitra region, District Nitra
Nitra region, District Nitra
Contract type
full-time
full-time
Information about the position
Job description, responsibilities and duties
We have an exciting opportunity to work for a new automotive Company in the Nitra region. We are hiring for the position of Dimensional Control Engineer (Quality/Measurement/Metrology).
This is opportunity also for experienced Quality Engineers, Senior Quality Engineers with willingness to learn.
Purpose of the Position:
From the Design phase to the Commercial Launch of the vehicle, the Dimensional Control Engineer will lead and perform complex problem solving with respect to dimensional accuracy, fit and function in Body, Paint and Assembly shops.
This involve cross functional interaction to define tolerancing, locator strategy, measurement plan strategy, part feasibility in a design phase, and then lead the maturation of the body accuracy and fit with trim part via process commissioning, quality loop in stamping, bodyshop, trim and final assembly.
1.Technical Analysis
- Locator Strategy for Body assembly
- Gauging Strategy for single panel and parts
- Part design feasibility assessment
- Analyse BIW measurement reports (CMM, Inline/Perceptron, etc)
- Analyse Stamping part measurement reports
- Analyse Trim part measurement reports
- Process commissioning methodology (co holing exercise…)
- Checking fixture commissioning
- Root cause analysis through evaluation of measurement data & 'hands on' panel/fixture fitting techniques
- Implement confirmed (temporary/permanent) countermeasures for dimensional, fit & function problems
- Initiate part sample production trial to detect process defects/errors and to confirm product changes and quality improvements
2.Confirmation/optimization of operating processes and supplier parts
- Develop concepts to improve BIW tooling (dies & assembly fixtures) and inspection devices Initiate product & process change concepts in-house as well as external suppliers
- Confirm stamping/assembly parts in regards to dimensional accuracy/repeatability & manufacturability
- Consult with tool and part suppliers regarding optimization of dies and assembly fixtures with SQE
- Support Fit & Function Team analysis of daily issues as required
- Support development and follow up of quality feedback loops
- Support Process Engineering with manufacturability issues
- Mature the BIW process to reach excellence in capability
- Mature the BIW product to deliver conform customer features (capable as well)
3.Initiate confirmation activities
- Documentation of all trial plans and data results
- Initiate Design Change Requests and Part Deviation Request
- Support Process Engineering in developing concepts for larger process tooling and equipment changes
- Initiate product 'rework' work instructions when necessary
- Develop/integration of special tools, models and templates
4.Organization/participation at meetings
- Report out activity results at quality meetings
- Confirm results of internal and external initiated changes at the supplier
- Lead/Coordinate bringing cross-functional workgroups (Process Engineering, Quality, Production and Product Development) together to solve complex problems
- Facilitate dimensional accuracy and quality meetings with the appropriate areas
5.Core Department
- Support the Core Department continuous improvement by being active in Lesson & Learning feedback
- Develop standardisation of methodology, deliverables, input and output template
- Participate on benchmarking analysis of other OEM to collect best practice and adaptation to the JLR environment
This is opportunity also for experienced Quality Engineers, Senior Quality Engineers with willingness to learn.
Purpose of the Position:
From the Design phase to the Commercial Launch of the vehicle, the Dimensional Control Engineer will lead and perform complex problem solving with respect to dimensional accuracy, fit and function in Body, Paint and Assembly shops.
This involve cross functional interaction to define tolerancing, locator strategy, measurement plan strategy, part feasibility in a design phase, and then lead the maturation of the body accuracy and fit with trim part via process commissioning, quality loop in stamping, bodyshop, trim and final assembly.
1.Technical Analysis
- Locator Strategy for Body assembly
- Gauging Strategy for single panel and parts
- Part design feasibility assessment
- Analyse BIW measurement reports (CMM, Inline/Perceptron, etc)
- Analyse Stamping part measurement reports
- Analyse Trim part measurement reports
- Process commissioning methodology (co holing exercise…)
- Checking fixture commissioning
- Root cause analysis through evaluation of measurement data & 'hands on' panel/fixture fitting techniques
- Implement confirmed (temporary/permanent) countermeasures for dimensional, fit & function problems
- Initiate part sample production trial to detect process defects/errors and to confirm product changes and quality improvements
2.Confirmation/optimization of operating processes and supplier parts
- Develop concepts to improve BIW tooling (dies & assembly fixtures) and inspection devices Initiate product & process change concepts in-house as well as external suppliers
- Confirm stamping/assembly parts in regards to dimensional accuracy/repeatability & manufacturability
- Consult with tool and part suppliers regarding optimization of dies and assembly fixtures with SQE
- Support Fit & Function Team analysis of daily issues as required
- Support development and follow up of quality feedback loops
- Support Process Engineering with manufacturability issues
- Mature the BIW process to reach excellence in capability
- Mature the BIW product to deliver conform customer features (capable as well)
3.Initiate confirmation activities
- Documentation of all trial plans and data results
- Initiate Design Change Requests and Part Deviation Request
- Support Process Engineering in developing concepts for larger process tooling and equipment changes
- Initiate product 'rework' work instructions when necessary
- Develop/integration of special tools, models and templates
4.Organization/participation at meetings
- Report out activity results at quality meetings
- Confirm results of internal and external initiated changes at the supplier
- Lead/Coordinate bringing cross-functional workgroups (Process Engineering, Quality, Production and Product Development) together to solve complex problems
- Facilitate dimensional accuracy and quality meetings with the appropriate areas
5.Core Department
- Support the Core Department continuous improvement by being active in Lesson & Learning feedback
- Develop standardisation of methodology, deliverables, input and output template
- Participate on benchmarking analysis of other OEM to collect best practice and adaptation to the JLR environment
Employee perks, benefits
Prestige brand with a lot of benefits.
Company on whose behalf the position is being filled
Automotive industry, manufacture of transport equipment
OEM
OEM
Requirements for the employee
Candidates with education suit the position
Secondary with school-leaving examination
Follow-up/Higher Professional Education
University education (Bachelor's degree)
Follow-up/Higher Professional Education
University education (Bachelor's degree)
Language skills
English - Upper intermediate (B2)
Personality requirements and skills
- Engineers should be highly self-motivated, production orientated individuals, with proven team leading and effective communication skills.
- Applicants should ideally possess a grade, in a relevant Engineering Discipline and sound hands on experience in the dimensional product on tooling maturation, preferably in the Body Shop.
- Computer literacy and an ability to write technical reports and give presentations are essential requirements.
- Experience in metrology and manufacturing engineering as well as Six Sigma experience as Green Belt or Black Belt are beneficial
- Self motivated, confident, team player.
- Good communication skills, both verbal and written (English).
- Applicants should ideally possess a grade, in a relevant Engineering Discipline and sound hands on experience in the dimensional product on tooling maturation, preferably in the Body Shop.
- Computer literacy and an ability to write technical reports and give presentations are essential requirements.
- Experience in metrology and manufacturing engineering as well as Six Sigma experience as Green Belt or Black Belt are beneficial
- Self motivated, confident, team player.
- Good communication skills, both verbal and written (English).
Advertiser
Brief description of the company
Talent Solutions has been operating in Slovakia since 2002, and it has built a network of nine branches and onsite offices throughout the country.
Talent Solutions has proven to be a flexible and unbiased company with respect for the specific characteristics and requirements of the Slovak job market, without compromising on the quality of services.
Even after many years on the market, we have not deviated from our mission to anticipate our clients’ needs and adhere to the highest standards that guarantee individual effective solutions.
Talent Solutions has proven to be a flexible and unbiased company with respect for the specific characteristics and requirements of the Slovak job market, without compromising on the quality of services.
Even after many years on the market, we have not deviated from our mission to anticipate our clients’ needs and adhere to the highest standards that guarantee individual effective solutions.
Number of employees
50-99 employees
ID: 2705306
Megjelentetés dátuma: 24.1.2017
2017-01-24
Régió: Nitra region, District Nitra Pozíció: Metrologist, Process Engineer, Quality Engineer, Quality Inspector, Quality Manager Cég: Talent Solutions - ADECCO